| Subject: | Re: Soeedo repair |
| From: | John Lauterbach <john@JHL.MGACOXMAIL.COM> |
| Date: | Thu, 20 Jan 2022 12:49:28 -0500 |
Take a look at the hub on left front wheel. � The wheel end of the speedometer fits
into a bracket there. � John
On Thu, 2022-01-20 at 17:17 +0000, ddbjorkman@verizon.net wrote:
> Hi Zoltan;
> The cable has already been replaced.� Problem still there.� Needle shakes, not
> bouncing.�
> Dave B.
>
>
> -----Original Message-----
> From: thewestyman <zolo@FOXINTERNET.NET>
> To: vanagon@GERRY.VANAGON.COM
> Sent: Thu, Jan 20, 2022 9:28 am
> Subject: Re: Soeedo repair
>
> The clicking is the cable is broken.� Change it. Check the book and see how
> it is done.� Takes time.� Not much gray matter.
> Zoltan in Hungary
>
>
> -----Original Message-----
> From: ddbjorkman@verizon.net
> Sent: Wednesday, January 19, 2022 10:32 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Soeedo repair
>
> Hello all;
> My speedometer needle is bouncing around and I have a clicking noise.� I
> lubed it up with a non-petroleum lubricant by dripping it onto the speedo
> cable and reinserting it and driveing a bit a few times.� I thought it
> worked, but the problem soon reared ir's ugly head and came back.I seem to
> remember someone doing speedometer repair.� My eyes are no good for that
> kind of job so I'm looking for someone to do it.Any thoughts on this one.
> Dave B.the Boston oneHoping my posts are going through at last.