← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Sort by authorSort by posting dateSort by topicChronological orderMost recent firstShow authorHide authorShow table of contentsHide table of contentsBack to main VANAGON pageJoin or leave VANAGONSearch
Subject:Re: Battery light comes on above 3200 rpm
From:Eric Caron <ericcaron96@COMCAST.NET>
Date:Tue, 7 Apr 2020 22:52:46 -0400

Glad Dennis and Alistair replied because I never received the original post.
Also, because they have real advice.

I send Greg good wishes for a safe trip home and look forward to an update on the issue.

And, I have no idea what it is but I’m going to say a bad ground as almost 3 out of 4 times it seems like that is the solution.  So I’m sticking to that.

Eric 

> On Apr 7, 2020, at 10:41 PM, Dennis Haynes <d23haynes57@HOTMAIL.COM> wrote:
> 
> Or bad bearing, loose mounts, wiring, ground etc. 
> 
> Dennis
> 
> 
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Alistair Bell
> Sent: Tuesday, April 7, 2020 10:35 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: Battery light comes on above 3200 rpm
> 
> I’m cooking, I mean really, so quick....
> 
> Alternator voltage reg... brushes worn out.
> 
> My first guess
> 
> Alistair 
> 
>> On Apr 7, 2020, at 7:31 PM, Gregg Carlen <gricha@verizon.net> wrote:
>> 
>> Hi folks,
>> 
>> I’m cruising along this evening about 60mph on the road and my battery light comes on. I slowed and it went out. 
>> 
>> After some trial and error, I figured out everything is okay if I keep the rpms under 3200. If I go over that, the battery light comes on, and very soon the dashboard lights dim and headlights dim. I let off the gas to get under 3200 rpm and the battery idiot light goes out and everything brightens up again.
>> 
>> Could my voltage regulator be going bad? Alternator? Something else I should look at?
>> 
>> I’m still traveling, so hopefully o can nurse it the rest of the way home.
>> 
>> FYI; 1990, almost everything stock on a 2.1l. Don’t have access to my records right now, but o don’t think the alternator is more than 5-10 years old. The belt was just recently replaced. Had about 0.5 - 1” flex in it. Could it be too tight?
>> 
>> Thanks in advance for any advice!
>> 
>> Gregg
>> 90 Westy

← Previous in threadNext in thread →
Back to April 2020, week 1
Have something to add on this topic today? Revive this thread in the forum »